High manganese steel hammer head, crusher hammer head, the accurate definition should be hammer crusher
hammer head, hammer head is one of the core parts of hammer crusher, arranged on the hammer shaft of the
crusher rotor, hammer head directly hits the material when the crusher runs at high speed, broken into the
appropriate material size.
The structure design and geometry of the hammer of metal crusher have great influence on its mechanical
properties and internal metallographic structure after heat treatment. Especially the hammer head with large t
hickness and size, the influence is more prominent. According to the analysis of the failure forms of hammer head
with different materials, it can be seen that the main reason for the failure of hammer head is the different degree
of defects in its internal or surface. Due to the existence of defects, most hammerheads break at the beginning of
use. Therefore, reasonable casting and heat treatment process must be developed in the production of hammer
head. High manganese steel hammer head impact hardening degree is good, its service life will be extended. The
lumpiness and hardness of the crushed material lead to the hammer wear fast of high manganese crusher. The
larger the lumpiness of the material, the higher the requirement for its toughness, and the higher the hardness of
the material, the higher the requirement for the hammer material hardness. The specific type of crusher should
adopt appropriate feeding particle size, which will extend the service life of hammer head to a certain extent.
Adjustment of internal clearance of hammer crusher The clearance inside the hammer crusher mainly refers to
the clearance between the rotary body, counter plate, grate and hammer head. The SIZE OF THESE GAPS WILL
DETERMINE THE DISASSEMBLY AND WHETHER there IS ACCUMULATED MATERIAL near the safety GATE. If
THE ASSEMBLY IS PRESENT AND THE ASSEMBLY CANNOT BE REMOVED FROM THE ASSEMBLY, THE ASSEMBLY
WILL SUFFER SEVERE FRICTION AND WEAR. Therefore, in the process of use, it is necessary to adjust the gap
of each part frequently, so that it is in the appropriate range.

 

Q1. What's your company's casting methods?

  A: We support sand casting and lost foam casting.

  Q2. Can you make products without drawing?

  A: No, we can only make products strictly according to customers'

      technical drawing. Because every spare parts must be install to

      the equipment even little error will make big problem.

  Q3. How about the lifetime of your wear spare parts?

  A: Different working condition make different results based on same

      products. You buy our products and try them, you will know our

      quality.

  Q4. What's the delivery time?

  A: Usually abroad brands' delivery time is 30 days, but if we need to

      make wooden mould, then 15 days more. Domestic brand's

      delivery time will be 20 days.

  Q5. What's the payment term does your company accept?

  A: T/T, L/C, Western Union etc.